Installation
Mounting this AIO is a breeze, Fractal Design include a small allen key to use with the screws for the fans while the mounting screws are a normal thumbscrew/Phillips head combo.
These are the screws for mounting the block fully assembled, you slide the spring over the screw, place a washer on the end then screw the nut on to hold it all in place.
The mounting plates are separate for both AMD and Intel (AMD pictured here) are in two parts that slide into grooves on the block and then lock together nice and tight (Shiny cold plate isn’t it?)
Here it is mounted in my testing rig and looking very sleek indeed, Since this uses the stock AMD back plate for mounting instead of a custom one it’s just one step less you need to worry about.
- 1. Intro
- 2. Installation
- 3. Performance Testing
- 4. Conclusion
